Frequently asked questions

WaterLink™

  • Yes.

    WaterLink  pipe  and  fittings  are  compatible  for  use  and  interchangeable  with  other  brands of polybutylene pipe and  fittings which have been manufactured and certified  to AS/NZS 2642 and dimensionally compatible.   

    The 25-year warranty for WaterLink  pipes  and  fittings will not be affected when used with such certified polybutylene systems.

  • Yes. SecuraGold™ and Buteline crimpers are designed for AS/NZS 2642 sizing. We will maintain our warranty even when used with these tools.

  • WaterLink™ offers plumbers a proven Polybutylene plumbing system that is compatible with existing AS/NZS 2642 tools and pipework in New Zealand homes.

    LEAP made the decision to continue manufacturing to the AS/NZS 2642 standard that plumbers across NZ have used for decades for these key reasons:

    1. Thinner Walls, Same Strength: WaterLink pipes meet all AS/NZ 2642 pressure requirements without the bulk of AS 5082 pipes. This means lighter, easier-to-handle pipes that perform just as well.

    2. Higher Flow Rates: With a larger internal bore compared to AS 5082 pipes, WaterLink provides better flow rates, reducing complexity in design and installation.

    3. Fewer Costs & Faster Installation: No need to buy new fittings or tools—WaterLink works with the ones you’re already using. Plus, its lighter weight allows for faster, more efficient installations.

    • PB-1 pipe is highly flexible, reducing the number of fittings required, which cuts down on both installation time and costs. Its lightweight nature makes it easier to install, offering added convenience on the job.

    • The pipe doesn’t corrode and prevents scale build-up, ensuring a longer lifespan.

    • It boasts nearly double the strength of PP-R and PE-RT, according to ISO9080 evaluations of PE-RT, providing exceptional durability.

    • With a thinner wall, it offers a larger internal diameter, leading to higher flow rates and improved energy efficiency.

    • Its quiet operation minimizes water hammer, and it demonstrates excellent resistance to creep.

    • PB-1 is also the ideal solution for plumbing systems in areas that may experience freezing conditions.

  • WaterLink is available at leading merchants such as Plumbing World, Mico, Zips, Chesters, My Plumbing Depot and others.

  • WaterLink™ fittings are available in 3 sizes in NZ -- 15m, 18mm, 22mm. Please download the WaterLink™ brochure for more information.

  • Yes, we are currently developing a 28mm range, which will be available soon. Stay tuned for updates on its release.

WaterTite™

  • Yes, the Rifeng battery tool can be used with WaterTite fittings as long as it is equipped with a U profile jaw. The LD profile has not yet been tested with WaterTite fittings.

  • Yes. GasTite/WaterTite is manufactured under AS4176 (multilayer) and AS3500 (monolayer) standards. LEAP cross-warrants its products with other manufacturers that adhere to the same standards.

  • Yes, the Mini Battery Pressing Tool comes with a 1-year warranty.

  • The tool should be serviced every 30,000 crimps. A crimp counter is included to help keep track.

  • LEAP carries out the servicing, which typically takes two days plus shipping. Loan tools are available, subject to availability.

  • No, LEAP jaws/heads are only compatible with the LEAP Mini Battery Press Tool. However, there are compatible jaws/heads for other tools, including REMS and Kembla.

  • The LEAP Mini Battery Press Tool is warranted for use on LEAP pipes and fittings. Warranty for use on other systems would need to be confirmed with the relevant manufacturers.

CopperLink™

  • Yes, REMS tools with a VI profile jaw are compatible with CopperLink. Ensure proper servicing as per the manufacturer's guidelines.

  • CopperLink is currently available at Plumbing World, Mico, and Zips.

  • We are confident that CopperLink is competitively priced compared to other copper press fittings in New Zealand.

  • Yes, copper pipe can be installed under concrete as long as it is properly lagged to prevent direct contact with the concrete. All installations must comply with relevant regulations. LEAP CopperLink comes with a 25-year warranty, and installations must adhere to the warranty conditions.

  • While it is technically possible to remove the O-ring for brazing, this is not recommended, as doing so would void the warranty. LEAP strongly recommends pressing the fittings as designed.

  • FKM O-rings will be available soon. Currently, our yellow HNBR O-rings are not suitable for wetback or solar applications.

  • Yes, these jaws have been tested and are covered under warranty for use with CopperLink, provided the tools and jaws are maintained in line with the manufacturer's guidelines.

  • Yes. We can confirm that the Gas/Yellow O-ring is safe for use in potable water applications.

GasTite™

  • Yes, the Rifeng battery tool can be used with GasTite fittings as long as it is equipped with a U profile jaw. The LD profile has not yet been tested with GasTite fittings.

  • Yes. GasTite/WaterTite is manufactured under AS4176 (multilayer) and AS3500 (monolayer) standards. LEAP cross-warrants its products with other manufacturers that adhere to the same standards.

  • Yes, as long as the tool uses a U profile jaw. The LD profile has not yet been tested with GasTite fittings.

  • No, LEAP jaws/heads are only compatible with the LEAP Mini Battery Press Tool. However, there are compatible jaws/heads for other tools, including REMS and Kembla.